Hall Effect Rotary Position Sensor

To sense rotary movement of the actuator shaft. 

• Linearity ±0.5% to ±1% absolute.
• Electrical angular range, 15° to 360°.
• 50 Million life cycles.

Most widely used in Industrial applications:

• HVAC damper control, valve control, etc.
• position and movement detection of :
  • pedals, steering, linkages, suspension displacement, etc.

Automotive Open loop current sensor

Accurate measurement of current in electric vehicles and automotive vehicles.

• Measured current values from ±200 A to ±1,500 A
• Output voltage 0.5 V to 4.5 V ±10%
• Response time <3 µsec Output: Analog (ratiometric)

Most widely used in Industrial applications:

• Battery management
• DC/DC converters
• Motor control EV motor inverters

Non contact inductive Position Sensor

Rotary Position Sensor measures the angular position of a metallic target over 360° electrical rotational angle.

• Detect the position of a solid metallic structure that is sliding or rotating.
• Rotary and Linear stroke.
• Analogue, PWM or SENT output (10 and 12 bits resolution full scale).
• Long linear stroke up to 800mm.
• Supply voltage 4.5 to 5.5V +/-10%

Applications:

• E-motor rotor position sensor.
• brake, clutch, throttle pedal sensor, etc.
• Hand throttle position.
• Suspension height sensor.
• Steering wheel position or Steer-by-wire.
• Seat position.qChassis level position.
• Power trim and tilt angle.
• Crankshaft and camshaft position.

Hall Effect Gear Tooth Speed and direction sensor

To measure speed and direction of ferrous gears of vehicle transmission.

• Maximum speed: 12 kHz (forward) / 7 kHz (reverse).
• Output: A/B signal OR Two wire current source.

Most widely used in Industrial applications:

• Vehicle transmission and engine speed.
• Wheel speed and direction.
• Anti-lock braking system and pump speed feedback.

Seat belt Sensor

Detect when seat belt tongue has been engaged even under harsh environments.

Applications:

• Bus/Car seat belt switch.
• Off road vehicle seat belt switch.
• Marine seat belt switch.
• Airplane seat belt switch.
• Retractable seat belt safety switch.
• Electric Cars and Individual fall protection systems.

NTC Temperature Sensors

These are designed for temperature monitoring of electric motors in electric vehicles.

• Operating temperature range: -40℃~200℃
• AC 1500V 1mA 1S
• R100=3.3KΩ, B0/100=3970K

Applications:

• The motor in Electric vehicles (EV)
• The motor in Hybrid electric vehicles
• Temperature measurement and temperature monitoring

Surface Mount Thermistor Probe

To measure the temperature of the batteries, motors and other components in electric vehicle.

• RoHS
• Interchangeability
• Operating temperature range: -20℃ ~105℃ (PVC wire)
• Operating temperature range-40℃ ~125℃ (Teflon or XLPE wire).
• OEM and ODM available

Applications:

• EV/HEV Bus
• Battery Covers
• Power Distribution Thermal Management

Battery Health Sensor

Battery Health Sensor for monitoring the voltage, temperature, and current load for batteries and DC power systems

• Voltage: 0~60VDC
• Current: external C% +50A ~ +1500A
• Temperature range -40°C to +75°C
• Temperature Monitoring:-40°C to 75°C

Applications:

• Monitor Starter motors and alternators
• Solar panel
• Battery stacks